English 
Español 
Français 
Euskara Proportional electrical power controls
In SRC We manufacture and distribute a wide range of sithemes of power control proportional electric to adapt to each control process in all types of machinery, so much industrial like laboratory .
Regulation with Proportional Electric Power Controls
In a large number of thermal process applications with electric resistance heating, there is a parameter that often requires greater precision in its regulation: the heat. The objectives are important given that the alternating currents that are handled can reach from tens to thousands of amperes.
Proportional electrical power controls They have various current control modes in order to better adapt to the type of resistance used.
The most common is phase angle control.
The different models go further by incorporating the possibility of coordinating the operation of groups of various equipment and suppressing disturbances in the control loop (such as variations in the network, non-linearity and/or temporary variations in the load).
Savings with Proportional Electric Power Controls
Thanks to the proportional regulation SRC guarantees a longer life of its electrical resistances, due to its electronic control system, which carries out a very precise temperature stabilization process, making them work at lower power.
The expansion and contraction of resistive wires caused by systems all nothing either SSR They damage the resistors prematurely and with this equipment we avoid it. On the other hand, they may have a energy saving to the not have power peaks in production (lower contracted power).
Our specialization in temperature control allows us to offer you the full control loop, with the teams of sign, regulation, power and heating.
Our Teams
Single-phase power control SRC48P
18-46A
Single-phase power control equipment for alternating current regulation in heating processes such as ovens, heaters, packaging machines, plastic injection, aluminum, zamak, etc. The SRC48 series equipment accepts a 4-20 mA analog input signal from any control system such as temperature regulators, pcls…
Single-phase power control SP Series 20-150A
Single-phase power control systems by phase angle for precise regulation of electric heating resistors, considerably extending the life of the heaters, eliminating thermal shock and adjusting the electrical load for better energy management. Equipment up to 300 Amps.
Three-phase power control CP3F Series 20-150A
Three-phase phase angle power control systems for precise regulation of electrical heating resistors, considerably extending the life of the heaters, eliminating thermal shock and adjusting the electrical load for better energy management. Equipment from 20 to 150 Amps.
Three-phase power control CP3F Series 200-1000 A
Three-phase phase angle power control systems for precise regulation of electrical heating resistors, considerably extending the life of the heaters, eliminating thermal shock and adjusting the electrical load for better energy management. Equipment from 200 to 1000 Amperes.
Three-phase digital power control T Series
Low-cost three-phase power control systems for precise regulation of electric heating resistors, considerably extending the life of the heaters, eliminating thermal shock and adjusting the electrical load for better energy management. Equipment up to 100 Amps.
Digital single-phase and three-phase power control CPD Series
Single-phase or three-phase digital power control systems by phase angle for regulation of inductive or resistive loads with three-phase unbalance detection function, SCR failure, over current, measured load disconnection and PC Modbus RS485 connection.
Functioning
He temperature control is essential to improve the quality and reliability of the manufacturing process, as it provides a productivity improvement in all types of processes such as ovens, transformation facilities such as glassworks, steelworks, plastics, etc. These power control systems guarantee precision, linearity, and durability in every regulatory system
To achieve this objective, it is necessary to maintain constant tension, the current wave power applied to heating resistances. All disturbances caused, especially by variations in mains voltage or variations in load impedance, must be compensated.
By choosing a power regulator that has controls over these disturbances, possible oscillations in the desired temperature curve will be compensated and thus the response of the thermal regulation loop will be greatly improved.
With these proportional power controls you will have the best systems for temperature regulation and control, since they offer a reliability and precision excellent.
If the resistance load is constant either variable , inductive or of coupling of the transformer, single phase either triphasic, we have the right power control to meet your needs.
